The MWE232-A/B/C series port isolator has built-in photoelectric isolation, and the interface complies with EIA/TIA RS232 standards. It can provide isolation protection of up to 2500Vrms, with static and lightning protection, which can improve the reliability and stability of communication systems. The passive models(MWE232-A and MWE232-B) can be port-powered through each side of the serial port, no need the external power supply. The specific serial port protection circuit support hot plugging. The isolator hardware adopts a low-power and wide temperature design, can operate stably in temperature environment of -35 ℃ to+85 ℃, and can be widely used in equipment such as motors, transformers, relays, or scenarios with high amplitude transient interference.
-Signal isolation, transparent transmission, baud Rate self-adaption
-Serial circuit protection, anti-static protection, lightning protection, surge suppression
-600W/ms lightning protection, 15KV static protection
-Industrial design, imported components
Specification |
|||
Model |
MWE232-A |
MWE232-B |
MWE232-C |
Serial Port |
1 RS232 DB9F and 1 RS232 DB9M |
||
Baud Rate |
300bps~28800bps |
300bps~38400bps |
300bps~115200bps |
Signal |
TX,RX,CTS,RTS,DTR,DSR,GND |
TX,RX,GND |
|
Transmission Distance |
15m |
||
Power Input |
Port-powered |
External DC5V |
|
Working Current |
<10mA |
<15mA |
|
Dimensions |
63×33×17(mm) |
||
Weight |
31g |
33g |
|
Operating Temp |
-35℃~+85℃ |
||
Static Protection |
15kV |
||
Lightning Protection |
600W/ms |
NAME |
VERSION |
download |
---|---|---|
V1.1 |
||
Model |
Conversion Mode |
Baud Rate |
Isolation |
Power Input |
MWE232-A |
7-wire RS232 to RS232 |
300bps~28800bps |
2500Vrms |
Port-powered |
MWE232-B |
3-wire RS232 to RS232 |
300bps~38400bps |
2500Vrms |
Port-powered |
MWE232-C |
3-wire RS232 to RS232 |
300bps~115200bps |
2500Vrms |
External DC5V |
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China