MISCOM7028 series layer 2 Gigabit industrial Ethernet switch is a high-performance Ethernet communication product developed by Maiwe for industrial communication. The product uses high-performance industrial-grade switch chip, supports 4 Gigabit ports+24 10/100M RJ45 ports, AC220V / DC110V industrial power input, which improves the stability of network communication and save wiring. The MISCOM7028 series products can meet the high-end requirements of the smart grid especially in the industrial application environment and the communication performance of the equipment.
-Support 4 Gigabit fiber ports + 24x10/100M copper ports
-Support front and rear indicator status display
-Support MW-Ring ring network patent technology (failure recovery time is less than 20ms)
-Support static multicast filtering technology, IGMP Snooping
-Support broadcast storm suppression and port rate control functions
-Support industrial grade with isolated power supply, optional dual redundant power supply
-Support status relay alarm output such as power loss, fiber drop, and storm
-Supports network management functions such as VLAN, QoS, port aggregation, and port mirroring
-Industrial grade wide temperature design, fanless thermal design
-Meet the requirements of harsh industrial environments
-Conforms to IEC61850-3 standard
-Meets Grade A standard of State Grid
Software function |
|
Switch Properties |
Support port speed limit Support port aggregation Support port flow control Support port VLAN, IEEE 802.1Q VLAN Support broadcast storm suppression |
Redundancy Protocols |
Support MW-Ring ring network technology, self-healing time <20ms Support STP/RSTP |
Multicast |
Support IGMP v1/v2, IGMP Snooping Support GMRP and Support static multicast filtering |
Security |
Support IEEE 802.1x, HTTP, RADIUS, user grading and MAC address binding |
Service quality management |
Supports SP and WRR queuing. Support QoS setting |
IP address management |
Support DHCP server |
Management and maintenance |
Support Console, WEB management Support SNMPv1/v2c Support software upgrade Support host computer IP/MAC conflict alarm Support for power failure alarm, power alarm, port alarm Support port mirroring Support log viewing Support Link-check Support NTP Support accept frame transmission frame statistics |
Technical parameters |
|
Protocol Standard |
IEEE802.3, IEEE802.3u (100Base-TX&100Base-FX), IEEE802.3x (Flow control), IEEE802.3ab(1000Base-T), IEEE802.3z(1000Base-LX), IEEE802.1D(STP), IEEE802.1w(RSTP), IEEE802.1Q(VLAN), IEEE802.1p(Priority), IEEE802.1x(Access control) |
Switch capability |
|
Priority Queues |
8 |
VLAN Number |
4096 |
IGMP multicast group |
1k |
MAC Table Size |
8K |
Backplane bandwidth |
12.8Gbps |
Switch Delay |
<5μs |
Interface |
|
Gigabit ports |
Port numbers: 4 |
Connector: SFP fiber port(LC connector, single-mode/ multi-mode) or Self-adaption 10/100/1000M-TX Interface form: SFP optical port (LC interface, single/ multi-mode optional) or Self-adaption 10/100/1000M-TX |
|
Baud rate: 1000Base-LX (optical port), Self-adaption 10/100/1000MBase-TX |
|
100M Port |
Port number: 24 |
Connector: 1×9 fixed optical port (single/ multi-mode optional, optional SC/FC/ST interface) or RJ45 100M TX |
|
Baud rate:100Base-FX(optical port), Self-adaption 10/100MBase-TX |
|
Console port |
RS232, RJ45 |
Terminal block for relay alarm |
3-pin 5.08mm terminal block, 1A@24VDC |
Terminal block for power input |
5-pin 5.08mm terminal block |
Communication distance |
|
Twisted-pair |
100m(CAT5/CAT5e cable) |
Multi-mode Fiber |
Gigabit multi-mode: 850nm, 500m; 100M multi-mode: 1310nm, 2km |
Single-mode Fiber |
Gigabit single-mode: 1310nm, 20km; 100M singlemode1310nm, 20/40km; 1550nm, 60/80km |
LED indicator lights |
|
Front panel LED lights |
Port light: LINK/ACT; SPEED |
System work light: RUN |
|
Power status light: PWR1; PWR2; |
|
Alarm light: ALARM |
|
Back panel LED lights |
RJ45 Port light: LINK/ACT; SPEED |
Fiber light: LINK/ACT |
|
Power |
|
Input power |
AC/DC220V(85-264VAC/110-370VDC) |
Input current |
0.25A@110VAC/VDC |
Power consumption |
<40W@(MAX) |
Overload protection |
Support |
Reverse protection |
Support |
Redundancy protection |
Support |
Working Environment |
|
Operating Temperature |
-40°C~85°C |
Storage temperature |
-40°C~85°C |
Ambient Humidity |
5%~95% |
Physical Characteristics |
|
Shell |
IP40 protection, aluminum alloy shell |
Installation |
Standard 19-inch rack mounting, |
Dimension |
482.6mm×44mm×315mm |
Industry standard |
|
EMC |
EN61000-4-2(ESD), Level 4 EN61000-4-3(RS), Level 4 EN61000-4-4(EFT), Level 4 EN61000-4-5(Surge), Level 4 EN61000-4-6(CS), Level 4 EN61000-4-8, Level 5 |
Impact |
IEC60068–2-27 |
Falling |
IEC60068-2-32 |
Shock |
IEC60068-2-6 |
Warranty |
|
Warranty |
5 Years |
Certification |
|
Certification |
CE, FCC, RoHS |
NAME |
VERSION |
download |
---|---|---|
Version 1.1 |
Ordering Information |
|
MISCOM7028-4GF-AD220 |
4 Gigabit Fx ports +24x10/100M Tx ports, single AC85-264V/ DC110~370V isolate power supply |
MISCOM7028-4GF-4F(M/S)-AD220 |
4 Gigabit Fx ports +4x100M Fx ports +20 10/100M Tx ports, single AC85-264V/ DC110~370V isolate power supply |
MISCOM7028-4GF-8F(M/S)-AD220 |
4 Gigabit Fx ports +8x100M Fx ports +16 10/100M Tx ports, single AC85-264V/ DC110~370V isolate power supply |
MISCOM7028-4GF-12F(M/S)-AD220 |
4 Gigabit Fx ports +12x100M Fx ports,12 10/100M Tx ports, single AC85-264V/ DC110~370V isolate power supply |
MISCOM7028-4GF-16F(M/S)-AD220 |
4 Gigabit Fx ports +16x100M Fx ports +8 10/100M Tx ports, single AC85-264V/ DC110~370V isolate power supply |
MISCOM7028-4GF-24F(M/S)-AD220 |
4 Gigabit Fx ports +24x100M Fx ports, single AC85-264V/ DC110~370V isolate power supply |
enquiry@maiwe.com
+86 27 87170217
No.52, Liufang Road, East Lake Hi-tech Development Zone, Wuhan, China